Indian Tube Company
Indian Tube Company
Ranigunj, Secunderabad, Telangana
SEND SMS
SEND EMAIL

Pipes & Tubes

We are a leading Wholesale Trader of hdpe pipe, jindal mild steel black pipes, tata ti seamless boiler tubes, msl carbon steel seamless pipes (hot finished), jindal hot dip galvanised pipes p e / s e and s.a.w. pipe from Secunderabad, India.

HDPE Pipe

HDPE Pipe
  • HDPE Pipe
Get Best Quote
Approx. Price: Rs 200 / Piece

Product Details:

Minimum Order Quantity1 Piece
Unit Length6m
ColorBlack

We provide High Density Polyethylene Pipe (HDPE Pipe), HDPE Plastic Pipe and HDPE Irrigation Pipe, which is available in all standards like ISI-4984, ISO-4427, DIN-8074 and various grades like PE-63, PE-80, PE-100 and newly invented PE 100 material that is approved by international agencies such as Bodycote, Germany. Made using 100% virgin grade HDPE compounds, our range of pipe have an average life of more than 50 years under normal working conditions. These High Density Polyethylene Pipe, HDPE Plastic Pipe and HDPE Irrigation Pipe are available in sizes ranging from 20 mm to 1000 mm OD and pressure varying from 2.5 Kg/Cm2 to 20 Kg/Cm2. We offer customization on our range as per the specifications of our clients.

Note : Price mentioned is for general idea and it may fluctuate as per requirement

Features:

  • High flow capacity
  • Light in weight
  • Abrasion resistance
  • Durable
  • Chemical resistance
  • Weather resistance
Request
Callback
Yes! I am interested

Jindal Mild Steel Black Pipes

Jindal Mild Steel Black Pipes
  • Jindal Mild Steel Black Pipes
Get Best Quote
Approx. Price: Rs 120 / Kilogram(s)
E.R.W. Pipe
To IS 1239 (Part I) 1979 : BS 1387 : 1967

SIZE8.5/8" O.D. to 24" O.D.x 5mm to 12mm thick
MFGSSAIL (HSL) ROURKELA, ZENITH, JINDAL, PRAKASH etc
SpecificationsISS 3589 Gr. 330/410 API 5L Gr. BSS

MILD STEEL BLACK PIPES. P.E./S. ENDS.
SIZE

1/4" NB to 6" NB in LIGHT, MEDIUM & HEAVY DUTY

MFGS

ITC (TATA), ZENITH, JINDAL, PRAKASH, GUJARAT etc.

Specifications

ISS 1239, 1161, BSS 1387, ASTM A-120 API 5L


MS Pipe and MS Tube refers to Mild Steel Pipe or a Mild Steel Tubes

Mild Steel (MS) pipes are manufactured using low carbon (less than 0.25%) steel. Due to low carbon content the pipes do not harden and are easy to use. As MS Pipes are made from mild steel they can easily be welded and formed in various shapes and sizes for pipelining and tubing purposes. These are generally used for drinking water supply i.e. Plumbing, Firefighting, HVAC but can also be used in various other Industrial and Engineering applications. These pipes are usually coated with other metals/paints/varnish etc to prevent it from rusting but extra care should be taken to prevent it under extreme conditions.

Note : Price mentioned is for general idea and it may fluctuate as per requirement

Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
Yes! I am interested

TATA TI Seamless Boiler Tubes

TATA TI Seamless Boiler Tubes
  • TATA TI Seamless Boiler Tubes
Get Best Quote
Approx. Price: Rs 210 / Piece(s)
SEAMLESS BOILER TUBESBS 3059 PART.II GR.360 AND SA 210 GR. A-1O.D. FROM 31.8 TO 101.40 THK : 3.25MM TO 6.35MM

In Boiler tubes, when water is evaporated to steam are called Steam Generating Tubes. These Tubes also form the Walls of the Boiler and are hence called Water Walls or Water Wall Panels. These Tubes have very complicated shapes to allow Inspection openings and burner throats and fabrication require intricate binding on CNC programmable bending Machines and checking on 3D layouts.

We can supply these tubes with ends swaged/reduced to smaller diameters or expanded to higher diameters. Ends can be supplied fully ground and annealed to facilitate Expansion or bevelled to weld to Header Stubs. The Water Wall Panels are High frequency tube to tube welded and then bent on Panel Bending Machines or the Gas tight panel can be made by welding Fins to tubes using Low Temperature Automatic Welding Machines using CO2 and Filler wires.

Boiler has played an important role in the modern world from the early days of industrial revolution. Now-a-days boilers are widely used by Utility, Industrial, Commercial & Institutional sectors for heating and power generation. With the ever increasing demand for power, the requirements of utility boilers have gone up manifold in recent years. Tubes & pipes form the major part of any boiler in various applications like economizer, super-heater & headers. Size, grade, quantity of tubes & pipes depend on the design of the boiler which is based on fuel, temperature, pressure & volume of steam-flow. There is also continuous efforts to increase the efficiency of the boiler. With the demand for high capacity & high efficiency boilers, the demand for higher grade tubes & pipes have increased substantially.

Note : Price mentioned is for general idea and it may fluctuate as per requirement

Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece(s)
Yes! I am interested

MSL Carbon Steel Seamless Pipes (Hot Finished)

MSL Carbon Steel Seamless Pipes (Hot Finished)
  • MSL Carbon Steel Seamless Pipes (Hot Finished)
Get Best Quote
Approx. Price: Rs 300 / Piece

Product Details:

Minimum Order Quantity1 Piece
ColorBlack
ShapeRound
Surface FinishMill Finished

CARBON STEEL SEAMLESS PIPESASTM A 106 GR.B / API 5LGR.BFROM 1/2" TO 24" IN SCH 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS ETC.

Hot Finished Seamless (HFS) as differentiated from Cold Drawn Seamless (CDS) pipes and tubes are made by heating a solid billet or bloom and then punching or piercing it to make a hollow out of it. This hollow is subsequently passed through one or multiple stands with or without a tool inside to give it the final pipe or tube dimensions.

It is possible to manufacture large diameter and thick pipes of various grades in high volume through the HFS process. With the improvement in technology, HFS pipes & tubes now come with close dimensional tolerance & good surface finish.

Note : Price mentioned is for general idea and it may fluctuate as per requirement

Request
Callback
Yes! I am interested

Jindal Hot Dip Galvanised Pipes P E / S E

Jindal Hot Dip Galvanised Pipes P E / S E
  • Jindal Hot Dip Galvanised Pipes P E / S E
Get Best Quote
Approx. Price: Rs 150 / Kilogram

Product Details:

Minimum Order Quantity1 Kilogram
ShapeRound

E.R.W. Pipe
To IS 1239 (Part I) 1979 : BS 1387 : 1967

SIZE8.5/8" O.D. to 24" O.D.x 5mm to 12mm thick
MFGSSAIL (HSL) ROURKELA, ZENITH, JINDAL, PRAKASH etc
SpecificationsISS 3589 Gr. 330/410 API 5L Gr. BSS

HOT DIP GALVANISED PIPES. P.E./S. ENDS.
SIZE

1/4" NB to 6" NB in LIGHT, MEDIUM & HEAVY DUTY

MFGS

ITC (TATA), ZENITH, JINDAL, PRAKASH, GUJARAT etc.

Specifications

ISS 1239, 1161, BSS 1387, ASTM A-120 API 5L


Galvanised Iron (GI) Pipes are manufactured using mild steel strips of Low Carbon Steel Coils. The strips are passed through a series of fin rolls to give them a circular shape. The slit ends of the strips are then welded together by continuously passing high frequency electric current across the edges. The welded steel pipes are then passed through sizing sections where any dimensional deviations are corrected. The pipes are then cut into desired lengths by automatic cutting machines. The tubes are then pressure tested for any leaks randomly. The galvanization and varnishing of pipes are done as per specific requirements.

The GI Pipes are generally used for distribution of treated or raw water in rural or urban areas. These pipes are cheaper, light weight and easy to handle.

GI pipes uses:

  • Water & Sewage pipes
  • Electric poles
  • Structural purposes
  • Engineering purposes
  • Automotive purposes
  • Oil and gas transmission

Note : Price mentioned is for general idea and it may fluctuate as per requirement

Request
Callback
Yes! I am interested

S.A.W. Pipe

S.A.W. Pipe
  • S.A.W. Pipe
Get Best Quote
Approx. Price: Rs 200 / Kilogram(s)
Product RangeSpecifications
Dia. - 14"-80".
Wall thk. :
6 to 25.4 mm.
Length - Single random.
API 5L Gr. A&B

API 5L UPTO Gr. X70.

ASTM : A 252 Grades 1,2 & 3.

ASTM : 671/672/691.IS:3589.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
Yes! I am interested

Spiral ASTM Pipe

Spiral ASTM Pipe
  • Spiral ASTM Pipe
Get Best Quote
Approx. Price: Rs 150 / Kilogram(s)
Product RangeSpecifications
Dia. - 14"-80".
Wall thk. :
6 to 25.4 mm.
Length - Single random.
API 5L Gr. A&B

API 5L UPTO Gr. X70.

ASTM : A 252 Grades 1,2 & 3.

ASTM : 671/672/691.IS:3589.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
Yes! I am interested

Alloy Steel Seamless Pipes

Alloy Steel Seamless Pipes
  • Alloy Steel Seamless Pipes
Get Best Quote
Approx. Price: Rs 175 / Kilogram

Product Details:

Minimum Order Quantity1 Kilogram
ShapeRound

DESCRIPTIONSPECSIZE RANGE
ALLOY STEEL SEAMLESS PIPESASTM A 335 P-11,P-22P-5, P-9, P-91 ETC.FROM 1/2" TO 24" IN SCH 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS ETC.
Request
Callback
Yes! I am interested

Alloy Steel Tubes

Alloy Steel Tubes
  • Alloy Steel Tubes
Get Best Quote
Approx. Price: Rs 150 / Kilogram(s)
ALLOY STEEL TUBESASTM A 213 T-11, T-22, ETCO.D. FROM 31.8 TO 76.10 THK : 3.25MM TO 6.35MM
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
Yes! I am interested

Stainless Steel Seamless Pipes

Stainless Steel Seamless Pipes
  • Stainless Steel Seamless Pipes
Get Best Quote
Approx. Price: Rs 200 / Piece(s)
STAINLESS STEEL SEAMLESS PIPESA 312/213 TP 304, 310, 316, 316L, 321, 347 ETC.FROM 1/2" TO 24" IN SCH 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS ETC.

It is available in a variety of compositions, most popular of which are ASTM-A-213, Grade TD-321. (16% Cr, 8%N stabilized with titanium) and ASTM-A-213 Grade TD-347 (18% Cr, 8% Ni) stabilized with columbium. Either of these two may be used upto to 649oC. Care must be given to choice of welding rod to avoid brittleness in the welds.

Note : Price mentioned is for general idea and it may fluctuate as per requirement
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece(s)
Yes! I am interested

TATA TI ERW Boiler Tubes

TATA TI ERW Boiler Tubes
  • TATA TI ERW Boiler Tubes
Get Best Quote
Approx. Price: Rs 100 / Kilogram
For pipes or tubes size 4 inch (10.2mm) OD and below, strip is fed into a set of forming rolls which consists of horizontal and vertical rollers so placed as to gradually from the flat strip in to a tube which is then allowed to pass the welding electrodes. The electrodes are copper disks connected to the secondary of a revolving transformer assembly.

The copper disk electrodes make contact on each side of the seam and temperature is raised to the welding point. Outside flash is removed by a cutting tool as the tube leaves the electrodes, inside flash is removed either by an air hammer or by passing a mandnel through the welded tube after the tube has been cooled. This is termed as Electric Resistance welded or ERW tube/pipe. If this ERW is being drawn further to get desired size of tubes or pipes, in cold condition is called as Cold Drawn welded or CDW.

All power devices operate at high efficiencies required quality steel tubes, to guarantee their safe and long term operation. These Tubes are called as Boiler Tubes
Boiler Tubes are specially manufactured to withstand high pressure and temperature. Boiler tubes are used in energy type equipments like steam pipeline, boilers, super heaters etc.

Boiler tubing is used in these industries:

  • Steam Boilers
  • Fossil Fuel Plants
  • Heat Exchangers
  • Electric Power Plants
  • Cogeneration Facilities
  • Air Preheater Unit
  • Waste Heat Plants
  • Power Generation
  • Economiser etc
  • Strength of Pipes

    • Excellent weld quality
    • Steel used has been procured from leading manufacture SAIL
    • ERW Tubes with low tolerances on OD and thickness
    • Jindal Pipes is a “Self Certified Boiler Tube and Pipe Manufacturer”
    • In house R&D and Inspection team

    Note : Price mentioned is for general idea and it may fluctuate as per requirement

Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Kilogram
Yes! I am interested

Spiral Finned Tubes

Spiral Finned Tubes
  • Spiral Finned Tubes
Get Best Quote
Approx. Price: Rs 200 / Meter(s)
FINNED TUBES
While it is not necessary to tell engineers what finned tubes are, or that their use is mandatory in cases of gas-liquid heat exchange where the film coefficient ratio is above 2, it is essential to tell the engineers that FINNED TUBES are backed by not only engineering excellence of manufacture, but also by our zealously guarded reputation for the finest quality of all our products.

T-FINS
Helical Straight strip wound on the tube are mechanically secured. The tubes are required grade of steel, the fins are aluminium for maximum tube-wall temperature of 121 deg C (250 deg F) and mild service conditions.

L-FINS
Helical strip bent to L-shape are mechanically secured to the tube with the outer surface of the tube totally enclosed with fins, for full fin contact and protection of tube from chemical action of the gas for maximum tube-wall temperature of 177 deg C (350 deg F) and moderate service conditions.

G-FINS
Helical straight strip wound into pre-cut grooves on the outer wall of the tube, fin and groove lips mechanically closed for maximum tube-wall temperature of 371 deg C (700 deg F) and extreme working conditions.

STUDDED TUBES
We have developed state of the art Technology for studded Pipes and Tubes of Carbon, Alloy and Stainless Steel Material having extremely low clear gaps between studs. These are used in Refinery Services and Fluidized Beds Boiler Coils.

LONGTITUDINALLY FINNED TUBES
We have indigenous developed automatic welding machines for giving low distortion Longitudinally welded Finned Tubes used in low capacity Boilers.

MAJOR APPLICATIONS
Process liquid cooling, Water cooling in chemical, petroleum, petrochemical and similar uses, Condensing, etc. Heating of air by steam in tubes. Air-conditioning and refrigeration industries, Metallurgical industries for cooling of quenching oil.

Note : Price mentioned is for general idea and it may fluctuate as per requirement
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Meter(s)
Yes! I am interested

Heat Exchanger Tubes

Heat Exchanger Tubes
  • Heat Exchanger Tubes
Get Best Quote
Approx. Price: Rs 200 / Piece

Product Details:

Minimum Order Quantity1 Piece
MaterialStainless Steel

For pressure vessels and reaction vessels in M.S., Al, Monel, Inconel, Cupronickel, etc., We employs the latest techniques for expanding tube ends into tube sheets. High pressure tests are always carried out on these heat exchangers before they leave the factory. Brass, copper, M.S. and S.S. tube sheets are used. Tube sheets are also made out of mild steel, alloy steel or stainless steel and baffle plates are made out of mild steel or stainless steel. we fabricates 'U' Tube heat exchangers which are used in fertilizer plants, petrochemical and power project complexes.

Fabrication of U-Tubes for Heat-Exchangers Spans at extremely Short Delivery time, even Extra long (23 mts.) is our specialty. Tube Bending as per TEMA. Tubes to any specification and any length can be supplied in extremely short time due to our wide Mother Tube Stocks.

These Seamless Tube mainly find applications in Pressure Vessels, Cryogenic Pressure Vessels, High pressure Equipments, Tube Sheets of Heat Exchangers, Boilers, Air Pre Heater, Finned Tubes, Air Cooler Tubes, etc. They are used in Industries like Refineries, Power Plants, Steel Plants, Chemical Factories, Fertilizer plants, and Ship Building etc.

U Tubes are manufactured after the Straight Tubes are manufactured. The Bending is done in Cold State on an Automatic U Bending Machine. To ensure that wall thinning and diameter ovality are kept in control, bending of tubes Is done with a mandrel inserted in the tubes. Furthermore the U - Bend portion of the U-Tube is Stress Relieved in controlled conditions and cycle to give longer life.

The U bent tubes are finally 100% Tested for Hydrostatic Leak Test and then finally DP tested. These tubes are vulnerable to getting damaged in transit and hence are required to be handled with care. We ensure this by packing tubes in specially designed steel frames. These frames are fit into the wooden box o further ensure safety of the tubes.

These HEAT EXCHANGER TUBES mainly find applications in Pressure Vessels, Cryogenic pressure Vessels, High pressure Equipments, Tube sheets of HEAT Exchangers, Boilers, Air Pre Heater, Finned Tubes, Air Cooler Tubes, etc. They are used in lndustries like Refineries, Power Plants, Steel Plants, Chemical Factories, Fertilizer plants, and Ship Building etc.

Theses Seamless Tube can be manufactured in Straight Lengths or U Bent As per the customer Requirements.

Our tubes are manufactured by the Cold Drawn Process (Drawn on Mandrel) to provide the closest dimensional tolerance and smooth Outside and Inside Finish. Further to achieve the desired Mechanical Properties the tubes are Heat Treated ( Normalized , Stress Relieved , Annealed , Tempered Etc ) as per the customer / Grade requirement. Straightening is done on Multiple Roll Straightening Machines to achieve accuracy up 1mm: 1000mm Straightness. Our stringent Quality checks and Best Packing practices (For Exports Special 4 Layer Packing) ensure that the material delivered to the customer is of the highest quality and reaches the destination in best condition.

Note : Price mentioned is for general idea and it may fluctuate as per requirement

Request
Callback
Yes! I am interested

TATA Steel Hollow Sections

TATA Steel Hollow Sections
  • TATA Steel Hollow Sections
Get Best Quote
Approx. Price: Rs 210 / Piece

Product Details:

Minimum Order Quantity1 Piece
ApplicationAutomobile Industry, Construction, Pharmaceutical/Chemical Industry, Oil & Gas Industry

Tata Structura steel hollow sections are available in three categories

  • Square hollow sections - These are manufactured up to a maximum size of 250x250 mm
  • Rectangular hollow sections - These are manufactured up to a maximum size of 300x200 mm
  • Circular hollow sections - These are manufactured up to a maximum size of 300 mm NB

The thickness of these steel hollow sections vary from 2 mm to 10 mm, depending on what application the tubes would service. Each steel hollow section features a high strength to weight ratio that results in savings in steel and costs. The sections are best suited for welding, are corrosion resistant and easily bendable which leads to the shaping and construction of aesthetically appealing structures without comprising on strength and durability.

Quality and Certification

Tata Structura steel hollow sections are manufactured using only high quality pure steel HR coils. The structural hollow tubes conform to IS: 4923 and IS: 1161 manufacturing standards.

Note : Price mentioned is for general idea and it may fluctuate as per requirement

Request
Callback
Yes! I am interested
X
Looking for “Pipes & Tubes”?


Reach Us
Yatin R. Dhariaa (CEO)
No. 4 - 3 - 164/1, Hill Street, Ranigunj
Secunderabad- 500003, Telangana, India


Call Us

Send E-mail

Send SMS