Indian Tube Company
Indian Tube Company
Ranigunj, Secunderabad, Telangana
SEND SMS
SEND EMAIL

Fittings

Wholesale Trader of a wide range of products which include pipe elbow, pipe couplings, pipe union, reducer, pipe tee and cross.

Pipe Elbow

Pipe Elbow
  • Pipe Elbow
Get Best Quote
Approx. Price: Rs 150 / Piece

Product Details:

Minimum Order Quantity1 Piece
ConnectionWelded, Female
ApplicationStructure Pipe, Gas Pipe, Chemical Fertilizer Pipe
Elbow Bend Angle30 Degree, 45 Degree, 60 Degree, 90 Degree, 180 Degree

An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 90° or 45° angle, though 22.5° elbows are also made. The ends may be machined for butt welding, threaded (usually female), or socketed, etc. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.

Elbows are categorized based on various design features as below:

  • Long Radius (LR) Elbows – radius is 1.5 times the pipe diameter
  • Short Radius (SR) Elbows – radius is 1.0 times the pipe diameter
  • 90 Degree Elbow – where change in direction required is 90°
  • 60 Degree Elbow – where change in direction required is 60°
  • 45 Degree Elbow – where change in direction required is 45°

A 90 degree elbow is also called a "90 bend" or "90 ell". It is a fitting which is bent in such a way to produce 90 degree change in the direction of flow in the pipe. It is used to change the direction in piping and is also sometimes called a "quarter bend". A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. It is available in many materials like silicone, rubber compounds, galvanized steel, etc. The main application of an elbow (90 degree) is to connect hoses to valves, water pressure pumps, and deck drains. These elbows can be made from tough nylon material or NPT thread.

A 45 degree elbow is also called a "45 bend" or "45 ell". It is commonly used in water supply facilities, food industrial pipeline networks, chemical industrial pipeline networks, electronic industrial pipeline networks, air conditioning facility pipeline, agriculture and garden production transporting system, pipeline network for solar energy facility, etc.

Most elbows are available in short radius or long radius variants. The short radius elbows have a center-to-end distance equal to theNominal Pipe Size (NPS) in inches, while the long radius is 1.5 times the NPS in inches. Short elbows are widely available, and are typically used in pressurized systems.

Note : Price mentioned is for general idea and it may fluctuate as per requirement

Request
Callback
Yes! I am interested

Pipe Couplings

Pipe Couplings
  • Pipe Couplings
Get Best Quote
Approx. Price: Rs 70 / Piece

Product Details:

Minimum Order Quantity1 Piece
ApplicationStructure Pipe, Gas Pipe, Chemical Fertilizer Pipe

A coupling connects two pipes to each other. If the size of the pipe is not the same, the fitting may be called a reducing coupling or reducer, or an adapter. By convention, the term "expander" is not generally used for a coupler that increases pipe size; instead the term "reducer" is used. There are two different types of couplings: slip and regular couplings.

Note : Price mentioned is for general idea and it may fluctuate as per requirement
Request
Callback
Yes! I am interested

Pipe Union

Pipe Union
  • Pipe Union
Get Best Quote
Approx. Price: Rs 85 / Piece

Product Details:

Minimum Order Quantity1 Piece
ApplicationStructure Pipe, Plumbing Pipe, Chemical Handling Pipe, Gas Pipe, Drinking Water Pipe

A union is similar to a coupling, except it is designed to allow quick and convenient disconnection of pipes for maintenance or fixture replacement. While a coupling would require either solvent welding, soldering or being able to rotate with all the pipes adjacent as with a threaded coupling, a union provides a simple transition, allowing easy connection or disconnection at any future time. A standard union pipe is made in three parts consisting of a nut, a female end, and a male end. When the female and male ends are joined, the nut then provides the necessary pressure to seal the joint. Since the mating ends of the union are interchangeable, changing of a valve or other device can be achieved with a minimum loss of time. Pipe unions are essentially a type of flange connector, as discussed further below.

In addition to standard, simple unions, other types of union exist:

  • Dielectric unions are unions with dielectric insulation, used to separate dissimilar metals (such as copper and galvanized steel) to avoid the damaging effects of galvanic corrosion. When two dissimilar metals are in contact with an electrically conductive solution (even tap water is conductive), they will form a battery and generate a voltage by electrolysis. When the two metals are in direct contact with each other, the electric current from one metal to the other will cause a movement of ions from one to the other, dissolving one metal and depositing it on the other. A dielectric union breaks the electric current path with a plastic liner between two halves of the union, thus limiting galvanic corrosion.
  • Rotary unions are unions that allow for rotation of one of the united parts.

Note : Price mentioned is for general idea and it may fluctuate as per requirement

Request
Callback
Yes! I am interested

Reducer

Reducer
  • Reducer
Get Best Quote
Approx. Price: Rs 85 / Piece(s)
A reducer allows for a change in pipe size to meet hydraulic flow requirements of the system, or to adapt to existing piping of a different size. Reducers are usually concentric but eccentric reducers are used when required to maintain the same top- or bottom-of-pipe level. Material – ASTM A234 WPB

Note : Price mentioned is for general idea and it may fluctuate as per requirement
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece(s)
Yes! I am interested

Pipe Tee

Pipe Tee
  • Pipe Tee
Get Best Quote
Approx. Price: Rs 60 / Piece

Product Details:

Minimum Order Quantity1 Piece
ApplicationStructure Pipe, Plumbing Pipe, Chemical Handling Pipe, Gas Pipe, Drinking Water Pipe

A tee is the most common pipe fitting. It is available with all female thread sockets, all solvent weld sockets, or with opposed solvent weld sockets and a side outlet with female threads. It is used to either combine or split a fluid flow. It is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line. It is a short piece of pipe with a lateral outlet. A tee is used for connecting pipes of different diameters or for changing the direction of pipe runs. They are made of various materials and available in various sizes and finishes. They are extensively used in pipeline networks to transport two-phase fluid mixtures. They are categorized as:

  • Equal
  • Unequal

When the size of the branch is same as header pipes, equal tee is used and when the branch size is less than that of header size, reduced tee will be used. Most common are tees with the same inlet and outlet sizes. Some of the industrial tees are Straight Tee, Reducing Tee, Double Branch Tee, Double Branch Reducing Tee, Conical Tee, Double Branch Conical Tee, Bullhead Tee, Conical Reducing Tee, Double Branch Conical Reducing Tee, Tangential Tee, and Double Branch Tangential Tee.

The above tees are categorized on the basis of their shapes and structure. They can also be classified on the basis of the application they are required to perform.[further explanation needed]

The three outlet sizes should be named in order (e.g. left, middle, right; measuring 15-22-15).[further explanation needed] The three sizes of a tee are end x end x center, so a tee that is 1" on both ends and 3/4" in the center it would be 1" x 1" x 3/4".

Request
Callback
Yes! I am interested

Cross

Cross
  • Cross
Get Best Quote
Approx. Price: Rs 100 / Piece

Product Details:

Minimum Order Quantity1 Piece
ApplicationStructure Pipe, Gas Pipe, Chemical Fertilizer Pipe

Cross fittings are also called 4-way fittings. If a branch line passes completely through a tee, the fitting becomes a cross. A cross has one inlet and three outlets, or vice versa. They often have solvent welded socket ends or female threaded ends.

Cross fittings can generate a huge amount of stress on pipe as temperature changes, because they are at the center of four connection points. A tee is more steady than a cross, as a tee behaves like a three-legged stool, while a cross behaves like a four-legged stool. (Geometrically, "any 3 non-collinear points define a plane" thus 3 legs are inherently stable.) Crosses are common in fire sprinkler systems, where stresses caused by thermal expansion are not generally an issue, but not in plumbing, due to their extra cost as compared to using two tees.

Note : Price mentioned is for general idea and it may fluctuate as per requirement

Request
Callback
Yes! I am interested

Pipe Cap

Pipe Cap
  • Pipe Cap
Get Best Quote
Approx. Price: Rs 90 / Piece(s)

A type of pipe fitting, usually liquid or gas tight, which covers the end of a pipe. A cap is used like plug, except that the pipe cap screws or attaches on the male thread of a pipe. A cap may have a solvent weld socket end or a female threaded end and the other end closed off. In plumbing systems that use threads, the cap has female threads. Industrial caps can be round, square, rectangular, U-shaped, I-shaped and may have a round hand grip or a flat hand grip.

If a solvent weld cap is used to provide for a future connection point, several inches of pipe must be left before the cap. This is because when the cap is cut off for the future connection, enough pipe must remain to allow a new fitting to be glued onto it.

Note : Price mentioned is for general idea and it may fluctuate as per requirement

Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Piece(s)
Yes! I am interested

Plug

Plug
  • Plug
Get Best Quote
Approx. Price: Rs 70 / Piece

Product Details:

Minimum Order Quantity1 Piece
ApplicationStructure Pipe, Plumbing Pipe, Chemical Handling Pipe, Gas Pipe, Drinking Water Pipe

A plug closes off the end of a pipe. It is similar to a cap but it fits inside the fitting it is mated to. In a threaded iron pipe plumbing system, plugs have male threads. Some of the popular types of plugs are:

  • Mechanical pipe plug
  • Pneumatic disk pipe plug
  • Single size pneumatic all rubber pipe plug
  • Multi-size pneumatic pipe plug
  • Multi-size flow-through pipe plug
  • High pressure pipe plug

Note : Price mentioned is for general idea and it may fluctuate as per requirement

Request
Callback
Yes! I am interested

Pipe Nipple

Pipe Nipple
  • Pipe Nipple
Get Best Quote
Approx. Price: Rs 60 / Piece

Product Details:

Minimum Order Quantity1 Piece
ApplicationStructure Pipe, Gas Pipe, Chemical Fertilizer Pipe

A short stub of pipe, usually threaded steel, brass, chlorinated polyvinyl chloride (CPVC) or copper; occasionally just bare copper. A nipple is defined as being a short stub of pipe which has external male pipe threads at each end, for connecting two other fittings. Nipples are commonly used for plumbing and hoses, and second as valves for funnels and pipes.

Note : Price mentioned is for general idea and it may fluctuate as per requirement
Request
Callback
Yes! I am interested

HDPE Fittings

HDPE Fittings
  • HDPE Fittings
Get Best Quote
Approx. Price: Rs 200 / Piece

Product Details:

Minimum Order Quantity1 Piece
ApplicationStructure Pipe, Gas Pipe, Chemical Fertilizer Pipe

The HDPE fittings offered by us are manufactured for butt weld type fabrication and jointing. We also undertake job work for jointing/butt welding/fusion welding of HDPE pipes and fittings as per the client’s requirements. Being durable our fittings are made from 100% virgin material for better performance. Our Fittings are available for all sizes of pipes as per all standards
Advantage of Polyethylene Fittings

•High impact and breakage resistance.
•Very high resistance to direct sunlight (uv resistance for long time .this is supplied by ultraviolet light resistance agent mixed to the PE raw material.
•There is no need to take protection precautions at the time of installation like cathodic protection.
•Availability of connection at a place out of the trench.
•Advantage of being not affected from earth movements like landslide , earthquakes , etc.
•Advantage of higher durability & advantage of easy installation and transport without material loss.
•Very good adoption to earth movements.
•Many different pressure resistance option, PE pipe fittings can be produced resistant to 12 different pressure class from 2.5 bar up to 32 bar.
•High resistance to chemical, not affected from corrosion , decaying and abrasion.
•Advantage of perfect leak proof no crack no break and no deformation.
•Advantage of safe application in irregular surface like sea, river, lake passages etc.
•Availability of more than one connection method (butt welding. Electrofusion welding , push fit sockets etc.)
•Advantage of having perfectly smooth internal surface because of this advantage of PE pipe fittings in comparison to the other pipe fitting types.This brings considerable saving in the overall cost of the line and the services costs.
•PE pipes fittings have the advantage of very long service life under severe conditions.

Note : Price mentioned is for general idea and it may fluctuate as per requirement
Request
Callback
Yes! I am interested
X
Looking for “Fittings”?


Reach Us
Yatin R. Dhariaa (CEO)
No. 4 - 3 - 164/1, Hill Street, Ranigunj
Secunderabad- 500003, Telangana, India


Call Us

Send E-mail

Send SMS